Many homeowners pay attention to mold problems mostly in the bathrooms and kitchen but tend to forget about the attic. It is likely that you barely visit the attic, especially if no one lives there. It is for this reason that you are likely to experience mold issues in the attic. This area of the house should thus be regularly inspected for mold or otherwise, the problem could worsen to a point of costing you the whole attic. This article looks at some of the many ways to deal with mold in the attic.
- Empty the Attic
The first step to attic mold remediation is identifying the problem that could be causing the growth of the mold. However, this cannot be achieved with the room full of clothing, bedding, and furniture. Any items, especially clothing and bedding, should be put in thick plastic bags to prevent them from being contaminated as you scrub off the spores. Doing this also helps you to clear the way for you to identify the moisture problems with ease. The items should not be put back into the attic until the room has been dried off the fungicide.
- Identify Moisture Problems
Moisture is known to be the leading cause of mold and mildew. Most of the moisture comes factors such as heat from cooking in the kitchen and humidity from warm water in the bathroom downstairs. This mostly happens if those lower areas are not properly ventilated or the air conditioners have failed. As the hot air rises, it is trapped by the cold attic roof and condenses to form moisture that drips down along the rafters, a phenomenon known as stack effect.
- Stop Ventilation
The next step is to close all the windows and doors and if possible, cover them with some plastic paper. This is to stop infiltration of air into the room, which would otherwise cause the spores to spread all over the room, even into spots that were not previously infested. Wind from outside the house would blow the spores and spread them all over the house, meaning that the whole remediation would be nullified. Besides, this helps you to know the areas that do not have enough ventilation, which is the main cause of mold infestation.
- Spray Fungicides
For lighter mold infestation, mix one spoonful of white vinegar with one cup of water and spray over the infested areas. Alternatively, you can use tea tree oil instead of vinegar. These are known to contain fungicidal properties that are not only strong, but they are also completely natural and safe for your health. When spraying, you are supposed to be wearing some gloves to avoid corroding your skin and a nose mask to protect you against inhaling mold spores or the vinegar. If the infestation is strong, try using hydrogen peroxide instead of white vinegar. This is because hydrogen peroxide is a little stronger hence more corrosive for stronger mold. The right proportion is to mix one part of hydrogen peroxide to two parts of water. Spray the mixture over the infested areas and wait for about an hour for the fungicide to dry off. You can afterward spray the fungicide as previously recommended.
- Scrub the Spores
Use a cloth made of hard material to brush off the mold spores from the areas that are not so heavily infested to avoid damaging the wood surface through discoloration. If the infestation is so strong, use a wire brush to remove the mold and its spores from the surfaces. If the room is not fully dry, try using a dehumidifier or a hairdryer. After all the fungicide has dried off, return the clothing and ensure to rectify the ventilation and air conditioning system in the attic area.
Experts advise that you maintain excellent ventilation in the attic to ensure no humid air builds up in the attic. They go further to advise that you should paint your attic with tan paint so that the black or white colorings of the mold are easily visible during remediation. If all the above methods have failed, you should try the experts since these are a guaranteed remedy for attic mold problems. On top of doing a thorough job, they will also advise you on the necessary measures to take to keep mold infestation at bay. That being said, source for the company with the best ratings and reviews so that you can deal with the mold problem in the attic for good.