Just like any other part of the house, a poorly cleaned and maintained AC is at the risk of mold attack. The worst-case scenario is that the AC is tasked with spreading cold air throughout the house. If it has mold growing in it, this can be very detrimental to your health since the mold spores will be distributed throughout the house. Being aware of the many health risks that come with presence in your house, you need to prevent the growth before it happens. This article looks at the steps you need to take to prevent mold growth in your AC unit.
- Clean and Repair Air Filters
Due to the tons of smoke and hot gases produced by your stove, the filters can at times get messy when the smoke cools off to form grease. If the grease is not cleaned regularly, it can act as a perfect breeding ground for mold and mildew. To avoid this, clean the filters in hot soapy water and dry them completely. Furthermore, faulty filters can cause poor ventilation, something that can harbor mold. To avoid mold growth in your AC, replace the filters regularly; let us say after every 3 months.
- Keep the Ducts Clean and Dry
Just like the filters, the ducts are at the risk of getting sticky and wet due to condensed smoke and hot gases from your cooking. When this does happen, a perfect breeding ground for mold will have been achieved. To avoid this, clean the ducts and maintain the dryness at all times. If it is too old to carry the hot gases out of the house, replace it with a new one.
- Keep it in Auto Mode
Most mold growth in the AC unit happens when you travel for a long time and the AC is not switched on for quite a while. The best thing about having a sophisticated AC unit is that it comes with an auto mode where you can schedule the AC to turn itself on at specific times that you set. It, therefore, means that you do not have to worry about mold build up even if you have been away from home for long. Even so, remember that the AC will be free from mold growth only if its parts are clean and maintained properly.
- Call in Mold Inspection Services
It is almost impossible to have complete mold-free air quality in homes. This is because the AC is always blowing mold spores into the house. In addition, if there is mold growing in your house, it can find its way into the AC if it is not in its best functioning condition. To prevent such a possibility, call in mold inspection services to ascertain the quality of the air in your house.
- Buy an AC with Humidity Control
Due to the hot gases passing through the AC, it can sometimes be warm when the blower and the filter are not functioning properly. In this case, the hot gases may condense to form moisture. Due to humidity and warmth, the AC can be a haven for mold. In such a situation, you would not do a lot to prevent this apart from buying an AC with humidity control.
- Have the AC Maintained Regularly
The AC is critical to the quality of air in our houses and hence should be maintained regularly to ensure it is in its best functioning condition. Faulty filters inhibit proper ventilation, wet and greasy ducts can harbor mold and mildew, while a faulty drain pan can also cause mold growth due to poor air conditioning. To ensure that the AC is functioning properly, ensure it is regularly maintained. It usually comes with an easy to read and understand operating and maintenance manual. Alternatively, call in an AC expert to have it checked for effective functionality. Experts advise that you have your AC maintained regularly, usually, once in every 3 months.
Mold is the single largest known cause for most allergies and some respiratory-related conditions such as asthma. You could be risking your life and that of your loved ones by ignoring mold growth in your AC. It will even be worse if the AC distributes the spores throughout the house. If you happen to notice signs of mold growth in the AC, call in mold remediation services immediately. Ensure to check their customer review and rating to be sure of the quality of their services.