Menu Close

Top 10 Things You Should Be Doing To Prevent Mold

Mold is a serious menace in most homes. Mold thrives in dark, warm, and moist spaces. It poses serious health risks and has been named the single leading contributor to majority of allergies and other breathing-related illnesses such as asthma. It can also cause massive structural damage, as well as inflating your monthly energy bills. Before all these problems happen, you should be concentrating more on how to prevent the mold from infesting your house, rather than removing it. This article looks at top 10 things you should be doing to prevent mold.

  1. Maintain Cleanliness

A dirty house can be a perfect breeding ground for mold and mildew. For example, when dust accumulates in the house, it results in the formation of debris, which acts as a haven for mold growth.

Big wet spots and cracks on the ceiling of the domestic house room after heavy rain and lot of water
Food leftovers and grease produced during heavy-duty cooking can also harbor mold growth. With this in mind, you need to maintain the highest levels of cleanliness if at all you want to do away with mold. At the same time, cleanliness saves you from bacteria and pathogens caused by dirt. This way, you remain healthy and you save lots of money with hospital bills.

  1. Turn On Your Purifier Often

The main contributor to mold growth in most homes is an unclean environment; it is due to accelerated humidity levels. And because cooking and hot showers in the bathroom produce lots of steam, turning on your purifier more often can help get rid of the humidity floating in your living space. The most advisable air purifier is the HVAC system because it regulates temperatures in the air. When it is too cold, it heats; when it is too hot inside, it cools down the house.

  1. Replace Your Air Vent Filters

You can have a very good air purifier but if you forget to invest in the filters, then you will always cross paths with mold. Filters are tasked with trapping dust and smoke particles coming from the living spaces and losing it to outside the house. Filters get faulty and ineffective when they get clogged with debris from dust, grease, and smoke particles. This leads to blockage of cooler fresh air from reaching your living space. This warm air promotes the growth of mold. To prevent this scenario, replace your air vent filters more often.

  1. Consider Mold-Resistant Installations

The good news is that you have many options to consider in regards to mold-resistant installations. When painting, you should go for the eco-friendly mold-resistant paint. You should also choose water-resistant types of floors like vinyl. Vinyl comes in big panels that reduce the number of grout, which are the most common breeding grounds for mold and mildew.

  1. Repair Your Leaking Pipes

Leakages in water pipes can be a serious source of moisture that leads to mold growth. To prevent moisture accumulation due to leaking water pipes, have them repaired of any leakages. At the same time, tighten the loose water taps, especially in the bathroom and under the sink. You can also consider replacing the bends, taps, and pipes that have been damaged beyond repair.

  1. Cover Your Crawl Space

Crawls space is the most notorious with moisture accumulation due to the collection of groundwater. Because of the heat in the house, this water could end up being vaporized and directed into the house, and this can support mold growth. The best solution for this is to seal the crawl space with a polyethylene film.

  1. Eliminate Clutter

So many people hold on to things they do not need in the first place. What they may not know is that such things block free airflow throughout the house. They also stand in the way of your cleaning, which means that you will be living in a dirty house. They also make the room dirty, preventing you from easily spotting mold on its onset. The good news is that you can make some extra money from selling the things you do not need.

  1. Conduct Regular Inspections

Mold growth starts with poor air quality in the house, and you can never know this until you start observing the situation in the entire house. Conducting regular inspections in the garage, the attic and crawl spaces can give you signs of mold growth on its onset. With this information, you can take the necessary measures to prevent growth in the first place.

  1. Monitor Your Insulators

Faulty or no insulation causes moisture buildup in the space between the drywall and the siding. This moisture causes mold growth in the space. The moisture may also find its way into the living space, causing mold growth in the house. Replacement of the insulator keeps mold at bay while at the same time preventing losses through hiked energy bills.

  1. Regrout and Recaulk

Due to their nature and small size, grout can sometimes go unnoticed when cleaning the floor. When dirt and dust settle in broken and worn out grout lines, this can be a perfect medium for mold thriving when combined with moisture in the house. This is why you should recaulk your grout lines and replace the seriously broken tiles.

Following the above tips to the letter should help you with your mold issues. If you still have issues, then it is the highest time you invited a mold professional to help. As you do that, ensure to land the best one in town by verifying the credentials.

Related Posts